UNI KLINGER LTD.
Featured Products
Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
Welcome to UNI KLINGER LTD.
Bi Metallic Bi Thermostatic Trap
UKL Introduces the Bi-Thermostatic Bimetallic steam traps, with corrosion resistant regulator. These Traps are unaffected by water hammer and superheated steam which having balanced pressure valve, independent seat and cone valve, and having a external adjustment device that can be used while the trap is functioning, for temperature and flow discharge. The trap also has an integral Y type Strainer.
The most innovative of the bimetallic steam traps is the bi-thermostatic steam trap of balanced pressure that incorporates two antagonistic [Opposing] thermostats.
The thermostat on top consists of various bimetallic plate pairs guided by the plugs stem, and the Lower thermostat is formed by one bimetallic sheet that leans and is guided in its edges by the body of the steam trap.
The superior [Upper] thermostat expands with the increase in temperature pressing the plug in the closing direction; at the same time, the inferior [lower] thermostat arches itself allowing the movement of the valve in the same direction, effectively resulting in the progressive strangulation of the condensate flow, till it reaches its complete closure.When the condensate temperature decreases the thermostats act inversely, consequently offering a large flow section.
The most Prominant advantages are:
- Optimum energy efficiency
- External adjustment mechanism while in service
- Possibility of repair while in operation
- Very long Life: Three times the life of the conventional Thermostatic Trap
- High reliability and versatility, Robust construction
- Resistance to water hammering, corrosive condensate, Freezing
- Automatic de aeration
- Works against high back-pressures
- Works in Superheated steam and High differential pressures
- Reduced maintenance and spare part cost
In Summary:
- Installation in any position
- This Trap can be used Bi-Directionally
- These Traps have a very long Life as compared to the conventional traps
- These traps allow discharge of condensate up to 40 Degrees Sub-cooled
These traps prevents excessive heat loss as it is filled with sub-cooled condensate as against the heat loss incurred in Thermodynamic and Ball Float Traps that are filled with Steam/Condensate at saturated temperatures.
The UKL Bi Thermostatic Bi Metallic Traps are available in pressures from 25,45, 110 and 215 Bars
Depending on the pressure and temperature conditions, the available models are: T25, T25 Ti, G25, G25 Ti, P45 Ti, G45 Ti, P110 Ti y P215 Ti.
The Smartwatch web attachment on the traps enables 24 x 7 monitoring of the Trap performance, Displaying performance in Real-time, showing Energy losses and Carbon emissions and carrying out continuous Audit and indicating potential savings of valuable resources.
Our Vision
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.
